Airlink101 APO1200 Manuel d'utilisateur

Wireless N/A 5GHz 200mW Outdoor AP Model: APO1200 Quick Installation Guide V.1.0

9 Setting Up the Client Bridge (Client Station) 3. Click Site Survey button. The system will automaticall

10 Note : 1. To verify wired network of Client Station can access Main Base Station, use ping command to “192.168.2.254

11 6. Configuring for Universal Wireless Repeater Note : 1. This section will walk you through the steps of sharing (bridging) an internet conn

12 Note : 1. The Channel of Repeat AP should be the same with Main Base Station. 2. To verify wireless clients can

13 7. How to configure TCP/IP settings on your PC Windows XP/2000 1. Go into the Control Panel, double-click

14 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com

1 1. Before You Start 9 Web Browser : Internet Explorer (7.0 or above), Firefox, Safari 9 A Computer with a network adapter properly

2 APO1200 is a multiple mode system which can be configured either as a wireless gateway or an access point as desired. It also can be used as

3 2. Hardware Installation 1. Connect N-type antenna to the N-type connector on the rear panel 3. Connect the opposite end of the RJ-45 c

4 3. Configuring the Access Point Note : 1. It is recommended that you configure the Access Point from a wired computer. Before the Access Point

5 Note : 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example

6 4. Configuring for WDS Link Note : 1. The system provide WDS function on Router AP Mode, AP Mode and WDS Mode. 2. WDS Link requires at least

7 4. Click Enable and enter the Remote APO1200's MAC Address. Setting Up the Remote APO1200 (Remote Base

8 5. Configuring for Client Bride Note : 1. This section will walk you through the steps of sharing (bridging) an internet connection in one bu